"Ставен Книг. как самому сделать лук" - читать интересную книгу автора

lamps inside at 70 degrees of C. The bow has a drawing weight equal
12.1 lb. I remember quite exactly that sport 39lb bows (when i shot
from a bow being a sportsman) have similarly the same limb theckness. I
think the problem is in fiberglass - i have fiberglass that used in
radio industry for making circuit boards like inside computers
(glass
cloth soaked with resin and pressed). I couldn't get any glass with
fibers going straight in one direction. Any ideas?
Besides i'm interested in method of seting limbs on the wooden
gripe of
the bow (i used 2 bolts clamping the limb and the gripe together).

Russia, S-Petersburg

Best regards,
Taras mailto:[email protected]
********************************************************************
Reply:

I couldn't get any glass with

>fibers going straight in one direction. Any ideas?

have you been looking at boat shop (windsurfers were using it there
are boats in st pertersburg )
or car repair (hardly unidirectionnal but still)
carbon couls work
an other idea : I took some unidirectionnal carbon fibers from old
carbon arrows (beman) by burning them (maybe not so good an idea)

I knew of one possible source helicopter aircraft manufacturers (if
you know someone at the factory....

>Besides i'm interested in method of seting limbs on the wooden
>gripe of
>the bow (i used 2 bolts clamping the limb and the gripe together).

works perfectly if bolt are strong enough

>Best regards,
> Taras mailto:[email protected]

Otherwise importing it seems the eaiest (if not cheapest) solution.
can look for a shop in paris having it (may not ship to russia though)
Good luck
Philippe
__________________________________________________________________________

II